Custom house plans from $1,495 · drawn by a general contractor, first draft in as little as 2 business daysStart

Ready-made plans · from $595

House plans

24 complete construction sets, each with realistic exterior images and a free sample sheet. Build once from $595, customize any plan, or have yours drawn from scratch.

Want it drawn for you? Custom plans from $1,495

Sage-green Foursquare from the front corner, showing the hip roof and the porch along the front

The Fairmont, sheet A-2, front + rear elevations (watermarked sample) — Actual plan setFrom the actual plan setA-2 Elevations· Front + rear elevations

How much you could save

Save roughly $8,000–$18,000 on a typical home

Estimates, not quotes

Architect-drawn custom plans commonly run $10,000–$20,000 once revisions are included. Our price includes three rounds of revisions. Based on what we see as general contractors.

Up to 1,800 sq ftYou could save
$8,500–$18,500
Architect set $10,000–$20,000 · Ours $1,495
2,000 sq ftYou could save
$8,300–$18,300
Architect set $10,000–$20,000 · Ours from $1,645
2,500 sq ftYou could save
$7,900–$17,900
Architect set $10,000–$20,000 · Ours from $2,020

Typical architect-drawn custom set compared with our price and the estimated savings, by home size
Home size	Typical architect set	Our complete set	You could save
Up to 1,800 sq ft	$10,000–$20,000	$1,495	$8,500–$18,500
2,000 sq ft	$10,000–$20,000	from $1,645	$8,300–$18,300
2,500 sq ft	$10,000–$20,000	from $2,020	$7,900–$17,900

It's your responsibility to call your local building department and find out whether sealed plans are required. If they are, we coordinate with a licensed structural engineer, who reviews the calculations in our plans, makes any adjustments necessary, and seals them. The engineer's fee is passed through at cost: commonly $1,000–$3,000, and from about $500 to $5,000 depending on the home. Plus our $150 coordination fee.

Architect-drawn custom plans commonly run $10,000–$20,000 once revisions are included. That's what we see as general contractors; it depends on the size of the home and how custom it is.
Our price: $1,495 up to 1,800 living sq ft, plus $0.75 (Standard) to $1.25 (Complex) per sq ft over 1,800, with three rounds of revisions included. The table uses the Standard price. Savings = the typical architect-drawn set minus our price.
Sealed plans, only if your building department requires them: a licensed structural engineer reviews, adjusts and seals our plans. Their fee is passed through at cost, commonly $1,000–$3,000, and from about $500 to $5,000 depending on the home, plus our $150 coordination fee. If you need one, subtract it from the savings.
Savings are estimates, not quotes or a promise. Your costs will vary.